Free Delivery on Orders over Net Value of £50
Next Day Delivery On All Orders Received Before 2pm
- Label Height : 100mm
- Labels Per Sheet : 4
- Labels Across : 2
- Label Width : 100mm
- Labels Down : 2
A4 Sheet containing 4 round labels per sheet for use in Laser , Copier & Inkjet printers.
Available in White Permanent and White Removable
Label size is 100mm diameter.
We offer sample FREE OF CHARGE. Click the button below to request your free samples today.
Material
White Permanent
White Removable
Coloured
Fluorescent
Metallic
White Opaque
White Deep Freeze
White Deep
Cream Kraft
Organic Kraft
Luxury Ivory Parchment
Digital Gloss
Matt White Polyprint
Matt White Polylaser
Gloss White Polylaser
Transluscent Polylaser
Matt Silver Polylaser
Glass Clear PET
Photo Quality Matt White
Photo Quality Gloss White
Laser
Copier
Inkjet
Spec Sheet
White Permanent
Subject to change without prior notice
Face Material
LSJ White Premium has a bright white, uncoated label paper with a very good opacity and a smooth finish, enabling good quality print results by both traditional pre-print processes Flexo / Litho and then overprinting using Ink-jet, Laser and Copier toner systems.
| Grammage | 69 g/m² ±10% | ISO 536 | Smoothness | 50 mls/min |
| Caliper | 77µ ±10% | ISO 534 | Print Opacity | 89% |
Adhesive
UK54 is a High Tack adhesive that performs well on a wide range of surfaces, including various boards. UK54 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. You hould always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, laser and other variable information printable laminates, UK54 has excellent resistance to edge bleed to prevent contamination inside printers. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.
| Composition | Cationic UV stabilized Adhesive. Produced with specific release factors |
| Minimum Application Temperature | +2°C |
| Service Temperature | -16 to + 80°C |
| Food Contact | Indirect |
Backing HSL
our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.
| Caliper | 80µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 24 months stores at 20°C/50% RH |
| Typical Laminate Caliper | 162µ ±10% |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
| This product / Laminate is FSC Approved |
White Removable
Subject to change without prior notice
Face Material
UK LH White Premium has a bright white, uncoated label paper with a very good opacity and a smooth finish, offers optimal results and toner keying with all Xerographic print sytems, both Copier & Laser systems and Inkjet printers. When converting laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in Laser and Copier systems. Care has also too be taken during our production and storage. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for most printers, is usually a multipurpose feed tray sometimes refered to as the MP tray or manual bypass. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs
| Grammage | 67 g/m² ±10% | ISO 536 | Smoothness | 150/160 mls/min |
| Caliper | 77µ ±10% | ISO 534 | Print Opacity | 89% |
Adhesive
UK24N is a Removable Adhesive that performs well on a wide range of surfaces, including various boards. UK24N is suitable for applications requiring medium tack combined with good removability. It is particularly suited for labelling surfaces like cardboard, PE-Films and steel. Removability may be impaired if applied on certain surface coated materials. Adhesive UK24N features excellent resistance to light, heat and ageing. You should always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, Laser Photocopier and other variable information printable laminates, UK24N has excellent resistance to edge bleed to prevent contamination inside printers.
| Composition | Dispersed Acrylic Adhesive with specific release factors |
| Tack | Medium |
| Shear | High |
| Peel Adhesion | Low (Removable) |
| Minimum Application Temperature | -25°C |
| Service Temperature | -40 to + 60°C |
| Food Contact | Indirect |
| Shelf Life | 1 Year |
Backing DTL
This coated kraft liner has been designed for production of label sheets for copiers and laser printers. The reverse of the paper assures excellent processing characteristics, i.e. high friction combined with high abrasion resistance.
| Grammage | 56 | ISO 536 |
| Caliper | 56µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 12 months stores at 20 ± 5°C/50% RH. Dark storage is recommended. Moisture, heat and direct sunlight have to be avoided. |
| Typical Laminate Caliper | 158µ ±10% |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
Coloured
Subject to change without prior notice
Stocked Colours
Sky Blue Warm Red Leaf Green Daffodil Yellow
Other colours are available made to order, get in contact for full information
Face Material
LSJ COLOUR TINTED a bright white, label paper with a very good opacity and a smooth finish, that we tint in a wide range of colours which will produce good quality print results by both traditional pre-print processes Flexo / Litho and then overprinting using Laser and Copier toner systems. Like most paper products our product is produced LONG GRAIN LSJ COLOUR TINTED is suitable for A4 sheet Labels, Computer sprocket punched fan-folded label sheets. When tinting the laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in laser and copier systems. Care has also been taken during our storage and production. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for desktop printers, is usually a multipurpose feed tray sometimes refered to as the MP tray. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perendicular to the feed path of the rollers ( ie., pointing in the direction of rotation )
| Grammage | 72 g/m² ±10% | ISO 536 | Smoothness | 160 mls/min |
| Caliper | 78µ ±10% | ISO 534 | Print Opacity | 95% |
Adhesive
UK54 is a High Tack adhesive that performs well on a wide range of surfaces, including various boards. UK54 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. You hould always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, laser and other variable information printable laminates, UK54 has excellent resistance to edge bleed to prevent contamination inside printers. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.
| Composition | Cationic UV stabilized Adhesive. Produced with specific release factors |
| Minimum Application Temperature | +6°C |
| Service Temperature | -15 to + 78°C |
| Food Contact | Indirect |
Backing HSL
our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.
| Caliper | 80µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 24 months stored at 20°C/50% RH. |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
Fluorescent
Subject to change without prior notice
Stocked Colours
Fluorescent Orange Fluorescent Lemon Fluorescent Green Fluorescent Flame Red
Other colours are available, get in contact for more information
Face Material
LSJ COLOUR TINTED a bright white, label paper with a very good opacity and a smooth finish, that we tint in a wide range of colours which will produce good quality print results by both traditional pre-print processes Flexo / Litho and then overprinting using Laser and Copier toner systems. Like most paper products our product is produced LONG GRAIN LSJ COLOUR TINTED is suitable for A4 sheet Labels, Computer sprocket punched fan-folded label sheets. When tinting the laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in laser and copier systems. Care has also been taken during our storage and production. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for desktop printers, is usually a multipurpose feed tray sometimes refered to as the MP tray. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perendicular to the feed path of the rollers ( ie., pointing in the direction of rotation )
| Grammage | 72 g/m² ±10% | ISO 536 | Smoothness | 160 mls/min |
| Caliper | 78µ ±10% | ISO 534 | Print Opacity | 95% |
Adhesive
UK54 is a High Tack adhesive that performs well on a wide range of surfaces, including various boards. UK54 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. You hould always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, laser and other variable information printable laminates, UK54 has excellent resistance to edge bleed to prevent contamination inside printers. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.
| Composition | Cationic UV stabilized Adhesive. Produced with specific release factors |
| Minimum Application Temperature | +6°C |
| Service Temperature | -15 to + 78°C |
| Food Contact | Indirect |
Backing HSL
our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.
| Caliper | 80µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 24 months stored at 20°C/50% RH. |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
Metallic
Subject to change without prior notice
Stocked Colours
Metallic Bronze Metallic Silver Metallic Gold
Face Material
LSJ COLOUR TINTED a bright white, label paper with a very good opacity and a smooth finish, that we tint in a wide range of colours which will produce good quality print results by both traditional pre-print processes Flexo / Litho and then overprinting using Laser and Copier toner systems. Like most paper products our product is produced LONG GRAIN LSJ COLOUR TINTED is suitable for A4 sheet Labels, Computer sprocket punched fan-folded label sheets. When tinting the laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in laser and copier systems. Care has also been taken during our storage and production. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for desktop printers, is usually a multipurpose feed tray sometimes refered to as the MP tray. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perendicular to the feed path of the rollers ( ie., pointing in the direction of rotation )
| Grammage | 72 g/m² ±10% | ISO 536 | Smoothness | 160 mls/min |
| Caliper | 78µ ±10% | ISO 534 | Print Opacity | 95% |
Adhesive
UK54 is a High Tack adhesive that performs well on a wide range of surfaces, including various boards. UK54 gives very good adhesion to low energy surfaces such as polythene, both at room temperature and under chill conditions. You hould always test the adhesive in the enviroment it will be used / applied. Suitable for use with Ink-Jet, laser and other variable information printable laminates, UK54 has excellent resistance to edge bleed to prevent contamination inside printers. Note: Not advised for labelling highly plasticised materials, eg: Flexible PVC.
| Composition | Cationic UV stabilized Adhesive. Produced with specific release factors |
| Minimum Application Temperature | +6°C |
| Service Temperature | -15 to + 78°C |
| Food Contact | Indirect |
Backing HSL
our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.
| Caliper | 80µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 24 months stored at 20°C/50% RH. |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
White Opaque
This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.
White Deep Freeze
Subject to change without prior notice
Face Material
Laser D Premium White - A surface sized white label paper with good opacity and a smooth finish, offers optimal results and toner keying with most Xerographic printing sytems, both Copier & Laser systems and also a great number of Inkjet printers. Like most paper products our product is produced with LONG GRAIN Laser D Premium White is suitable for A5, A4 & A3 sheets Fan Fold and Roll Label products When pre-printing the laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do this can lead to feed and print problems particularly in Laser and Copier systems. Great care has also been taken during the production and then storage. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for most printers, is usually a multipurpose feed tray sometimes refered to as the MP tray or Manual Bypass. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be Parallel to the feed path of the rollers ( ie., pointing in the same direction as the roller rotation )
| Grammage | 70 g/m² ±10% | ISO 536 | Smoothness | 200 mls/min |
| Caliper | 89µ ±10% | ISO 534 | Print Opacity | 90% |
Adhesive
DRP480 Deep Freeze is a Modified Deep Freeze Adhesive that performs well on a wide range of surfaces, including some plastics metals and various cardboard even with rough surfaces. DRP480 gives good adhesion to rough surfaces, but not for extremley curved surfaces, It can be be applied to Pre Frozen Products down to 20 ºC it has a Deep Freeze (long term) to - 40 ºC. But you should always test the adhesive in the enviroment it will be used / applied. Suitable for Laser Copier Ink-Jet, and other Variable Information Printers. Because of the softness of the adhesive and the coat weight required to achieve a High Level of Adhesion with this product we generally, Matrix Strip the Edges, ( Window Trim). Using our DRY EDGE TECHNOLOGY System.
| Composition | Modified Dispersed Water Borne Acrylic Adhesive. Produced with specific release factors |
| Minimum Application Temperature | -20°C |
| Service Temperature | -44 to + 62°C |
| Food Contact | Indirect |
| Shelf Life | 1 Year |
Backing HSL
our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.
| Grammage | 78g/m² ±10% | ISO 536 |
| Caliper | 76µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 12 months stored at 20°C/50% RH. |
| Typical Laminate Caliper | 166µ ±10% |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
White Megatac
Subject to change without prior notice
Face Material
UK Laser Megatac R has a bright white, uncoated label paper with a very good opacity and a smooth finish, offers optimal results and toner keying with all Xerographic printing sytems, both Copier & Laser systems and Inkjet printers. This product is designed fr Laser / inkjet printed labels require adhesion to a number of difficult and apolar surfaces Like most paper products our product is produced with LONG GRAIN UK Laser Megatac R is suitable for A5, A4 & A3 sheets, When converting laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in Laser and Copier systems. Care should also to be taken during our production and storage. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for most printers, is usually a multipurpose feed tray sometimes refered to as the MP tray or manual bypass. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perpendicular to the feed path of the rollers ( ie., pointing in the same direction as the roller rotation )
| Grammage | 71 g/m² ±10% | ISO 536 | Roughness | 5.5µ PPS10 |
| Caliper | 91µ ±10% | ISO 534 | Print Opacity | 90% |
Adhesive
UKPerm A4M is a High tack extra permanent adhesive specifically dformulated for adhesion to a range of difficult substrates such as a corrugated board and apolar plastic surfaces . UKPerm A4M gives superb intital tack / bond and long term adhesion even at low temperatures . Sheets converted for Laser, Copier and Inkjet Printing should always feature our UK DRY EDGE TECHNOLOGY
| Composition | Waterborne Acrylic Adhesive with specific release factors |
| Tack | [N] minimum. 14N FINAT (FTM 9) |
| Shead | [min] >2Hrs FINAT (FTM 8) |
| Minimum Application Temperature | +5°C |
| Service Temperature | -20 to + 100°C |
| Food Contact | Indirect |
| Shelf Life | 2 Years |
Backing HSL
our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for high speed, desktop Laser printers Copiers and Ink-Jet systems.
| Grammage | 56g/m² ±10% | ISO 536 |
| Caliper | 58µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 24 months stored at 20°C/50% RH. |
| Typical Laminate Caliper | 162µ ±10% |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
| This product / Laminate is FSC Approved |
Cream Kraft
This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.
Organic Kraft
This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.
Luxury Ivory Parchment
This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.
Digital Gloss
This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.
Matt White Polyprint
Subject to change without prior notice
Face Material
POLYPRINT R A matt white high pigmented computer imprintable polyethylene film POLYPRINT R is suitable for a wide range of Label products, Roll or Sheets (A5, A4 & A3) This product is suitable for printing through most laser / copier systems, mono & colour. It can also be used though thermal transfer systems with the suitable ribbon grade, dot matrix printed, Lithographic, Letterpress Silk Screen or Gravure giving excellent resultsin water based, solvent & UV Inks.Inks suitable for filmic substrates are recommended. Our product is produced with LONG GRAIN A curl may be evident on exiting the printer but will flatten quickly. *We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray. For most printers this is usually a multipurpose feed tray or manual bypass tray ( Not the Cassette or Draw ) . Most printer manufacturers recommend short edge lead into the printer (not wide edge). Grain should be parallel to the feed path of the rollers, i.e pointing in the same direction as roller rotation )
| Grammage | 115 g/m² ±10% | ISO 536 | ||
| Caliper | 178µ ±10% | ISO 534 | Print Opacity | 92% |
Adhesive
R37 permanent is a clear permanent adhesive featuring excellent initial tack, even on rough or apolar surfaces. Gives a very high-level of ultimate adhesion even on HDPE, Improved temperature water, solvent & general chemical resistance and is ideal for many industrial applications.
| Composition | Dispersed Acrylic Adhesive. Produced with specific release factors |
| Minimum Application Temperature | 0°C |
| Service Temperature | -20 to + 100°C |
| Food Contact | Direct contact with dry and moist and such kind of fatty foods which have a reduction factor of at least 4 according to the EC directive 85/572/EEC, certificate number 23519 U 06.t |
| Shelf Life | Minimum 1 Year |
Backing KSS100
our backing paper is a bleached kraft specially re humidified and stabilised to stay flat at all times during use.
| Grammage | 96g/m² ±10% | ISO 536 |
| Caliper | 108µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 24 months stored at 20°C/50% RH. |
| Typical Laminate Caliper | 296µ ±10% |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
THIS PRODUCTS MEETS THE REQUIREMENTS OF BS5609 PART II : MARINE USE
Matt White Polylaser
Subject to change without prior notice
Face Material
POLYLASER R Matt White A Matt White Polyester Film with an added ink toner receptive coating POLYLASER R Matt White is suitable for a wide range of Label products, Roll or Sheets (A5, A4 & A3) This product is suitable for printing through most laser / copier systems, mono & colour. It can also be used though thermal transfer systems with the suitable ribbon grade, dot matrix printed, Lithographic, Letterpress Silk Screen or Gravure giving excellent results with water based, solvent & UV cured Inks. Our product is produced with LONG GRAIN a curl may be evident on exiting the printer but should flatten quickly. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray. For most printers this is usually a multipurpose feed tray or manual bypass tray ( Not the Cassette or Draw ). Most printer manufacturers recommend short edge lead into the printer (not wide edge). Grain should be parallel to the feed path of the rollers, i.e pointing in the same direction as roller rotation )
| Grammage | 75 g/m² ±10% | ISO 536 | Smoothness | 50 mls/min |
| Caliper | 50µ ±10% | ISO 534 |
Adhesive
R37 permanent is a clear permanent adhesive featuring excellent initial tack, even on rough or apolar surfaces. Gives a very high-level of ultimate adhesion even on HDPE, Improved temperature water, solvent & general chemical resistance and is ideal for many industrial applications.
| Composition | Dispersed Acrylic Adhesive. Produced with specific release factors |
| Minimum Application Temperature | 0°C |
| Service Temperature | -20 to + 100°C |
| Food Contact | Direct contact with dry and moist and such kind of fatty foods which have a reduction factor of at least 4 according to the EC directive 85/572/EEC, certificate number 23519 U 06.t |
| Shelf Life | Minimum of 2 Years |
Backing KSS100
our backing paper is a bleached kraft specially re humidified and stabilised to stay flat at all times during use.
| Grammage | 96g/m² ±10% | ISO 536 |
| Caliper | 108µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 24 months stored at 20°C/50% RH. |
| Typical Laminate Caliper | 190µ ±10% |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
THIS PRODUCTS MEETS THE REQUIREMENTS OF BS5609 PART II : MARINE USE
Gloss White Polylaser
This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.
THIS PRODUCTS MEETS THE REQUIREMENTS OF BS5609 PART II : MARINE USE
Transluscent Polylaser
Subject to change without prior notice
Face Material
POLYLASER R Matt Translucent a Matt translucent Polyester Film with an added ink toner receptive coating POLYLASER R Matt Translucent is suitable for a wide range of Label products, Roll or Sheets (A5, A4 & A3) This product is suitable for printing through most laser / copier systems, mono & colour. It can also be used though thermal transfer systems with the suitable ribbon grade, dot matrix printed, Lithographic, Letterpress Silk Screen or Gravure giving excellent results with water based, solvent & UV cured Inks. Our product is produced with LONG GRAIN A curl may be evident on exiting the printer but will flatten quickly. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray. For most printers this is usually a multipurpose feed tray or manual bypass tray. Most printer manufacturers recommend short edge lead into the printer (not wide edge). Grain should be parallel to the feed path of the rollers, i.e pointing in the same direction as roller rotation )
| Grammage | 75 g/m² ±10% | ISO 536 | Smoothness | 50 mls/min |
| Caliper | 54µ ±10% | ISO 534 |
Adhesive
R37 permanent is a clear permanent adhesive featuring excellent initial tack, even on rough or apolar surfaces. Gives a very high-level of ultimate adhesion even on HDPE, Improved temperature water, solvent & general chemical resistance and is ideal for many industrial applications.
| Composition | Dispersed Acrylic Adhesive. Produced with specific release factors |
| Minimum Application Temperature | 0°C |
| Service Temperature | -20 to + 100°C |
| Food Contact | Direct contact with dry and moist and such kind of fatty foods which have a reduction factor of at least 4 according to the EC directive 85/572/EEC, certificate number 23519 U 06.t |
| Shelf Life | Minimum of 2 Years |
Backing KSS100
our backing paper is a bleached kraft specially re humidified and stabilised to stay flat at all times during use.
| Grammage | 96g/m² ±10% | ISO 536 |
| Caliper | 108µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 24 months stored at 20°C/50% RH. |
| Typical Laminate Caliper | 190µ ±10% |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
THIS PRODUCTS MEETS THE REQUIREMENTS OF BS5609 PART II : MARINE USE
Matt Silver Polylaser
Subject to change without prior notice
Face Material
Polylaser Matt Silver F PET Laser PET is Specifically designed for " Hot Fuse " Digital sheet fed systems and Laserr conbtinuous printing systems gives optimal flatnes, some post print curl can be seen on exit of printer, however flatness should return quickly Like most paper products our product is produced with LONG GRAIN is suitable for A5, A4 & A3 sheets, When converting laminate intended for subsequent overprinting, we take great care to control the laminate moisture and curl, our product is produced with layflat built in. Failure to do so can lead to feed and print problems particularly in Laser and Copier systems. Care has also too be taken during our production and storage. We advise that self adhesive laminates should be fed from the printer manufacturer's recommended input tray which, for most printers, is usually a multipurpose feed tray sometimes refered to as the MP tray or manual bypass. Most printer manufactures recommend Short Edge Lead into the printer (Not Wide Edge) Grain needs to be perendicular to the feed path of the rollers ( ie., pointing in the same direction as the roller rotation )
| Grammage | 59 g/m² ±10% | ISO 536 | Smoothness | 360/420 mls/min |
| Caliper | 51µ ±10% | ISO 534 | Print Opacity | 100% |
Adhesive
UK296 Permanent UK296 is a Clear Permanent Adhesive that performs well on a wide range of surfaces, including various boards. UK296 gives good adhesion to rough surfaces, but not for extremley curved surfaces, both at room temperature and under some chill conditions, it also has good freezing characteristics with very good ageing properties. You should always test the adhesive perfomance in the environment it will be used / an to be then applied. Suitable for use with Laser Photocopier and other variable information printable laminates, Because of the softness of the adhesive and the coat weight required to achieve a High Level of Adhesion with this product we generally, Matrix Strip the Edges, ( Window Trim). Using our DRY EDGE TECHNOLOGY System.
| Composition | Dispersed Acrylic Adhesive. Produced with specific release factors |
| Quick Stick | [N] approx. 430nm FINAT (FTM 9) |
| Shear | [min] >500 FINAT (FTM 8) |
| Peel Adhesion | [N] approx. 370nm FINAT (FTM 2) |
| Minimum Application Temperature | +5°C |
| Service Temperature | -20 to + 80°C |
| Food Contact | Indirect |
| Shelf Life | 2 Years |
Backing HSL
our backing paper is a bleached kraft with good flatness properties and dimentional stability. The laminate is for Desktop Laser Printers, Photo Copiers NOT Ink-Jet Systems.
| Caliper | 110µ ±10% | ISO 534 |
| Translucency | N/A | ISO 2469 |
| Roughness (Bendtsen) | 350 mls/min |
Laminate
| Laminate Shelf Life | 24 months stored at 20°C/50% RH. |
| Typical Laminate Caliper | 166µ ±10% |
| Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BfR XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. | Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998. |
Glass Clear PET
This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.
Photo Quality Matt White
This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.
Photo Quality Gloss White
This spec sheet is available upon request. Please call us on 0845 450 1580 or email us at sales@labels-direct.co.uk for more information.
Bespoke Labels Made for Your Exact Needs
Just share your specifications and receive a custom label quote tailored to your exact size, material, and finish.
